HP (惠普) cp1700 驱动程序免费下载(ver. UMR1014A)

在本页面,您可以永久免费下载HP (惠普) cp1700 驱动程序,设备类型为打印机。

HP (惠普) cp1700 (ver. UMR1014A) 发布 2002.05.24。

已被下载0次, 已被浏览341次。

类型 打印机
品牌 HP (惠普)
设备 cp1700
操作系统 Firmware
版本 UMR1014A
文件大小 4.46 Mb
已发布 2002.05.24
寻找并下载

正在寻找HP (惠普) cp1700 驱动程序,并提供下载链接。

正在搜索...
Firmware for HP cp1700 Type: Firmware   HP Color Inkjet cp1700 Firmware Version 1014A     Release date:  06-May-2002   Version: 1014A This firmware supports the hp color inkjet printer cp1700 series printer.­ It is highly recommended to upgrade to this new version if your printer firmware version is 1009A or lower.­ For a detailed description of the defect fixes,­ please refer to the readme file: readme To check the version of your firmware,­ you may use either one of the following methods.­ 1.­       Using the Toolbox 1.­       Click Start,­ Programs,­ HP Color Inkjet CP1700,­ and then HP Color Inkjet CP1700 Toolbox.­ 2.­       Select the Information tab.­ 3.­       Click Printer Hardware.­ 4.­        The current firmware version will be displayed in the Printer Information dialog box.­ NOTE:   The Toolbox must be properly set up for method 1 to work.­ 2.­       Using the printer's Control Panel ·          Turn on the printer and wait for the LCD on the printer to display “READY.­” ·          Press and hold down the POWER button.­ ·          While holding down the POWER button,­ press the RESUME button 5 times.­ ·          The firmware version will be displayed in the printer’s LCD.­ Step 2: Download Instructions 1.­    Create a new folder on the hard drive in which to save the downloaded files.­ ·          Right-click the Start button and then select Explore.­ ·          Click Local Disk (C:).­ ·          Click File,­ New and then Folder.­ ·          Type a name for the folder and then press Enter.­ 2.­      Download the firmware package UMR1014A.­EXE (Windows) or UMR1014A.­SIT (Mac OS) to the new folder created above.­ The latest firmware for the printer can be downloaded from the Internet at http:/­/­www.­hp.­com.­ Click here to go directly to the Downloads and Drivers page for the printer to download the latest firmware.­ 3.­       Uncompress the firmware package by double-clicking and save the files in the same folder.­ 4.­        Check that all the following files are there before proceeding.­ For Windows ·          PRNUTIL.­EXE ·          UMR1014A.­FHX For Mac OS ·          DropPrint|USB PPC ·          UMR1014A.­FHX   Step 3: Upgrade Instructions    For Windows Users ·          Connect the printer to the parallel port (LPT1) of the PC via a parallel cable.­ ·          Turn off the printer if it is on.­ ·          Press and hold down the RESUME button.­ ·          While holding down the RESUME button,­ press the POWER button once to set the printer to Flash (update) Mode.­ The LCD should display RCVING FHX Header.­ ·          Run PRNUTIL.­EXE.­ ·          Click Browse,­ select UMR1014A.­FHX and then click Open.­ ·          Select LPT1: under the list of available ports.­ ·          Click Go to start upgrading the firmware.­ ·           Ensure that the printer is in Flash Mode and click OK to proceed.­ ·          The progress of the update is shown by the progress of the asterisks (*) across the printer’s LCD.­ NOTE:   Do not interrupt the printer while flashing is in progress.­ The process takes about 5 minutes.­ ·           The printer will automatically turn off when the update is completed and the printer will be ready to use.­ For Mac OS Users ·          Connect the printer to the Macintosh via a USB cable.­ ·          Turn off the printer if it is on.­ ·          Press and hold the RESUME button.­ ·          While holding down the RESUME button,­ press the POWER button once to set it to Flash (update) Mode.­ The printer’s LCD should display “RCVING FHX Header.­” ·          Launch the DROPPRINT*USB PPC application.­ ·          Select the USB printer in the dialog.­ ·          From the File menu,­ select "Select File.­" ·          Click on the firmware file UMR1014A to start firmware upgrading.­ ·          The progress of the update is shown by the progress of the asterisks (*) across the printer’s LCD.­ NOTE:   Do not interrupt the printer while flashing is in progress.­ The process takes about 5 minutes.­   ·          The printer will automatically turn off when the update is completed and the printer will be ready to use.­          

热门打印机 HP (惠普) cp1700驱动程序:

热门HP (惠普) 打印机驱动程序: