HP (惠普) Deskjet 6840 Color Inkjet 驱动程序免费下载(ver. 12.­2.­0.­0)

Deskjet Full Feature Software/­Driver: Ethernet and 802.­11 Wireless WARNING: If you are using Windows 2000 with any firewall or Windows XP with a 3rd party firewall you may experience the following 2 issues: Note: Windows XP users with the built-in Internet Connection Firewall may ignore this warning.­ During the software installation,­ the HP Deskjet 6800 series network installer fails to locate the printer on the network.­ The error message,­ "Setup was unable to detect any printers on the network" appears.­ To prevent this issue from occurring,­ you must temporarily disable your firewall before you install the HP Deskjet 6800 series printer software.­ Consult the documentation that came with your firewall for help in disabling it.­ Some firewalls may require further configuration after printer installation in order for the printer to be made available on the network.­ Whenever the firewall is disabled,­ HP strongly recommends that the following items be installed on your computer: A hardware device that provides firewall protection between the Internet and your computer,­ such as a gateway An up-to-date antivirus software program For maximum virus protection while the firewall is disabled,­ disconnect your router from the Internet.­ Once the printer is installed,­ reconnect your router to the Internet.­ Some computers have multiple network connections (such as one connection for a local area network,­ and another connection for a wireless network).­ Disable each network connection's firewall.­ Set up printer hardware Plug power cord into power adapter and power adapter into printer.­ Plug power cord into outlet.­ Turn printer on.­ Load white paper.­ Ensure output tray is lowered.­ Open front cover Pull pink tab to remove clear tape from print cartridges.­ Do not touch copper strip.­ Wait until cradle is idle.­ Insert print cartridges then close latches.­ Close front cover.­ Connect to printer If you are using Windows 2000 with any firewall or Windows XP with a 3rd party firewall close all virus protection programs that are running on the computer (see above warning).­ For wireless install: Verify power and wireless status lights are on.­ Use the Ethernet cable (included in the box) to connect the printer to the network hub,­ switch or router.­ Verify Network light is on.­ If not,­ check cable connections.­ Temporarily disable any third party firewall.­ For Ethernet install: Use the Ethernet cable (included in the box) to connect the printer to the network hub,­ switch or router.­ Verify Network light is on.­ If not,­ check cable connections.­ For USB install: Do not plug in USB cable until directed to do so by the software.­ Create a new folder on the hard drive before downloading the printer driver.­ Suggestion: "c:\dj6800" Download the driver to the newly created c:\dj6800 folder.­ Open the c:\dj6800 folder and double-click on the downloaded "exe" file.­ Once the files are loaded and driver installation screen appears,­ proceed to step 8.­ Note: If this screen does not appear,­ continue with the next step (step 6) to manually open the screen.­ Double-click on the c:\dj6800 folder to open the folder.­ Double-click on the "setup" file to start the installation program.­ Follow the instructions on the installer screens to complete the installation.­ After installation,­ For wireless use,­ disconnect the Ethernet cable.­ Re-enable any disabled firewall software.­