HP (惠普) Deskwriter 680c DeskWriter 600 Series Printer 驱动程序免费下载(ver. 9.­4.­1)

DeskWriter 600 Series Printer Driver for HP Deskwriter 680c Type: Driver HP DeskWriter 600 Series Printer Driver for Macintosh QuickDraw.­ This driver replaces version 9.­4.­ This driver should eliminate the error dialog "The printer is not responding.­ Make sure that the current port is selected in the Chooser and that the printer is properly connected and turned on.­ Click Cancel to terminate printing.­" which occurs when trying to print from a G3 system over a serial connection using the existing driver.­ The driver supports the following HP printers: HP DeskWriter 600,­ HP DeskWriter 660C,­ HP DeskWriter 680C,­ and HP DeskWriter 694C.­ System requirements for using the version 9.­4.­1 driver: 68030,­ 68040 or PowerPC processor,­ System 7.­1 or newer (including System 8.­0),­ 4 MB RAM on 680x0 machines,­ and at least 8 MB RAM on the MAC PowerPC,­ and also 4 MB of free hard disk space.­ Installation Instructions: Note: The version 9.­4.­1 driver was "bin-hexed" using DropStuff.­ BinHex is an encoding format that allows electronic transfer of MAC format files.­ They have a .­hqx file extension.­ It will require the use of StuffIt Expander to de-encode or "de-bin-hex" the encoded driver file once it is downloaded to your hard drive.­ Some web browsers will contain a copy of this freeware utility.­ If the web browser you use does not contain StuffIt Expander,­ you may learn about it from the www.­aladdinsys.­com web site.­ You will have to obtain a copy of a bin-hex de-coder utility like StuffIt Expander external from the web (floppy disk or over a network),­ and install it on your System.­ The following steps assume you have the StuffIt Expander utility on your System.­ 1) Download the driver (.­hqx) file to your hard drive using a web browser.­ 2) StuffIt Expander will automatically expand the .­hqx file into the driver installer folder.­ 3) Open the driver installer folder and double-click on the installer icon to launch the driver installation.­ 4) Follow the instructions on the screen to completion,­ then select the printer in the Chooser menu.­