HP (惠普) Pavilion 8626 BIOS免费下载(ver. 2.­10)

BIOS for HP Pavilion 8626 Type: BIOS BIOS v2.­10 update for MEW-AM motherboard.­ Purpose: Recommended Update Category: BIOS Operating System: Windows ME Language(s): Global English Fixes: - Fixes setup displayed CPU speeds.­ - Resolves DMI table error.­ - Adds support for CPU multiplier 10X and 11X.­ - Adds power LED on PCB 2.­02.­ - Adds new Pentium III B step microcode.­ - Fixes merc_­210.­exe cannot flash error.­ Prerequisites: Blank floppy diskette How To Use: 1.­ Download the BIOS update.­ 2.­ Double-click the BIOS update icon and then click NEXT.­ 3.­ Accept the license terms and then click NEXT.­ 4.­ Insert a blank floppy diskette and click OK to continue the update.­ 5.­ Restart the PC with the diskette still in the floppy diskette drive.­ 6.­ Type "2" and then press Enter when prompted to indicate that you want to proceed.­ 7.­ Wait for the update to complete and then press any key on the keyboard when you are prompted.­ This should restart the PC.­ If the PC does not restart and you see the message below,­ continue to step 8; otherwise you are done with the update: 0251: System CMOS checksum bad - Default configuration used 8.­ Remove the floppy diskette from the floppy diskette drive.­ 9.­ Press F1 to open the BIOS Setup.­ 10.­ Press F5,­ choose YES,­ and then press Enter to load the BIOS defaults.­ (Use the arrow keys to choose YES,­ if necessary.­) 11.­ Press F10,­ choose YES,­ and then press Enter to exit the BIOS Setup and save your changes.­ (Use the arrow keys to choose YES,­ if necessary.­) 12.­ If you see a System Settings Change message prompting you to restart your PC,­ click YES to restart the PC again.­